Payment & Shipping Terms:
|Name Of Machine:||4 Side Moulder||Machine Body Structure:||Casting Iron|
|Voltage:||380 / Customize||Number Of Head:||4 Head|
|Total Power:||21.05kw / 28.6HP||Service Timing:||12 Months|
4 Heads Four Side Planer VH-M416 for Glued laminated timber
The Medium Duty 4 Side Moulder VH-M416
Four Side Moulder VH-M416 has four spindles and can process material with max working width of 160 mm, working thickness of 120mm. The lathe bed of VH-M416 is of integral structure , being made of casting with damping performance, and the rigidity of the lathe bed is better. Laying a good foundation for the smooth running of the cutter shaft and feeding system.
VH-M416 can be used to process Soft wood strip, Medium cutting capacity strip, MDF strip, HDF strip, Glued laminated timber and Square boards. It is a good choose for some simple furnitures production such as Children's furniture and Nordic Style Furniture ect, which does not need complex wood moulding.
1. Inverter to feed, speed range from 6 – 36m/min;
2. Each spindle of moulder VH-M416 ha4 its own Motor , which can guarantee the power for cutting;
3. All cutter shafts adjustment are carried out in front of the machine for convenience.
4. The machine Feeding Frequency inverter uses digital display, very easy to operate. It saves energy and also can reduce wearing because of mechanical transmission;
5. Electroplating with chrome improves durability of the worktable surface;
6. Equipped for advancing the smooth feeding of short piece availably;
7. Active feeding wheel is in front of the machine worktable, which make feeding easier and smooth;
8. Manual lubrication to the worktable and carriage, easy to centralized control;
9. Configure well-known brand electrical components, strong stability.
10. Sealed safety enclose to reduce noise levels, improve extraction and operator safety;
11. Optional: Moulder can be fitted with slotted plane for special requirement of customers.
|Working table length||1500|
|Main spindle diameter (mm)||Φ 40|
|Main spindle revolution(r/min)||6500|
|Air pressure (Mpa)||0.6|
|Motor power(KW)||1st LowerShaft||4kw/5.5HP|
|Right vertical spindle||4kw/5.5HP|
|Left vertical spindle||4kw/5.5HP|
|Feeding beam lifting||0.55kw/0.75HP|
|Cutter diameter||1st Lower Shaft||Φ 125|
|Right Vertical spindle||Φ 125-Φ 160|
|Left vertical spindle||Φ 125-Φ 160|
|1st Upper Shaft||Φ 125-Φ 160|
|Remark||Feeding wheel diameter (mm)||Φ140|
|Dust outlet diameter(mm)||Φ140|
The machine body is of high rigidity structure,being made of castings with vibration reduction performance,laying good foundation for the smooth running of the cutter shaft and feeding system.