Payment & Shipping Terms:
|Machine Type:||Four Side Moulder||Body Structure Of Product:||Casting Iron|
|Number Of Spindles:||5 Spindles||Highest Speed Of Working:||6 – 36 M/min|
|Condition:||New||Service Time:||12 Months|
High Speed Four Side Moulder VH-M521GH with slot for short materials length 100-120 mm
V-HOLD High Speed Four Side Moulder VH-M521GH
M521GH High Speed Moulder has superior material delivery system. The highest feeding speed can up to 60m/min
with automatic feeding system.
Professional solution for planning large amount of wood material such as finger joint splicing board. This machine
can largely reduce processing time of wood, it improve efficiency and help reduce labour cost.
1. Casting Iron machine body provide stable performance, it laid a good foundation for the operation of
cutter shafts and materials feeding;
2. Inverter to feed, speed range 10-60 m/min;
3. This machine can be used on machining the 4 side of finger-joined board by using 10 -16 edge spiral
4. Equipped with side chain conveyor;
5. Countertops using special materials, hard chrome plated surface, precision machining. Configure
slotted countertops, not only short materials can be processed, but also effectively reduce the friction
between wood and countertops;
6. Adopting SKF bearings with high precision.
|Working table length||1970|
|Main spindle diameter||Φ40|
|Main spindle revolution||7000|
|Motor Power||1st Lower Shaft||5.5kw/7.5HP|
|Right vertical spindle||5.5kw/7.5HP|
|Left vertical spindle||5.5kw/7.5HP|
|1st Upper Shaft||7.5kw/10HP|
|2nd Lower Shaft||5.5kw/7.5HP|
|Feeding beam lifting||0.75kw/1HP|
|Cutter diameter||1st Lower Shaft||Φ125|
|Right vertical spindle||Φ125-Φ180|
|Left vertical spindle||Φ125-Φ180|
|1st Upper Shaft||Φ125-Φ180|
|2nd Lower Shaft||Φ125-Φ200|
|Remark||Feeding wheel diameter||Φ140|
|Dust outlet diameter||Φ140|
|Overall dimensions (mm)||L3800*W1650*H1900|
Exquisite production technology with orderly inside. Automatic material feeding system is installde in the
front of working table,which can ensure the feeding of
material can be smooth.
L shape material delivery carried wood slowly ,but the speed of processing is much faster than manual work. It can improve efficiency and help reduce labour cost.
High-speed four-sided planer excellent characteristics: high-speed feeding speed. Feeding speed is 10-60 (m/min),
which can be programmed to provide convenient depth setting. Each spindle can be adjusted by the front of the
machine, so that the feeding table can be closer to the cutter head and improve the stability of planer processing.
Fully enclosed shield can avoid sawdust splash, ensure safety and isolate noise. Each spindle is driven by an
individual motor. The cutting force path is strong and the spindle control is convenient. Pneumatic feeding wheel,
pressure setting is very convenient, excellent feeding performance. Hard chromium plating treatment on the working
table surface, with long-term wear and tear. All manually adjusted rotating components are lubrication-free dry
bearings. Automatic lubricator, timely oil supply to rotating components. Cast iron fuselage is formed as a whole, and
after special heat treatment, it shows excellent stability and rigidity.